Skip to content

Cart

Your cart is empty

Article: What Is Gaffers Tape Used For? Gaff Tape vs Duct Tape Explained

What Is Gaffers Tape Used For? Gaff Tape vs Duct Tape Explained

If you have ever worked on a film set, a concert stage or an AV install, you have used gaffers tape. If you haven't, the name probably means nothing to you. That is why "what is gaffers tape" is the single most common question people search alongside the word itself. This guide answers it plainly: what gaffers tape is, what it is used for, and how it differs from the duct tape in your garage.

What is gaffers tape?

Gaffers tape (also written gaffer tape, gaffer's tape or shortened to gaff tape) is a heavy cloth tape with a matte finish and a rubber adhesive that is designed to hold firmly and then come off cleanly. It is named after the gaffer, the head of the lighting and electrical department on a film or TV crew, whose team uses it constantly to tape down cables and rig lights.

The gaffers tape we sell is a good example of what professional gaff tape looks like on paper:

  • Backing: cloth with a light PE coat to cut glare
  • Adhesive: natural rubber
  • Thickness: 12 mil
  • Tensile strength: 42 lb per inch
  • Adhesion: 50 oz
  • Roll length: 60 yards, in 1", 2", 3" and 4" widths

What is gaffers tape used for?

Gaffers tape exists for one job: holding things in place temporarily without damaging the surface underneath. That makes it the default tape anywhere equipment is set up and struck again, such as stages, sets, studios, venues and trade shows.

  • Taping down cables. Running a strip over power and signal cables on the floor keeps people from tripping and keeps cables from being pulled out of gear. Black gaffers tape is the standard here because it disappears on dark floors and stages.
  • Rigging and securing gear. Crews use it to hold gels, flags, cable runs and small fixtures in place for the length of a shoot or show.
  • Labeling. White gaffers tape takes a marker well, so it is used to label cases, cables and inputs.
  • Color-coding. Colored gaffers tape lets departments mark their own cables and gear at a glance.
  • Quick repairs on set. Because it tears by hand, there is no need for scissors in the middle of a take.

The matte, non-reflective finish matters on camera and under stage lights: shiny tape catches light and shows up in shots, while gaffers tape does not.

Gaffers tape vs duct tape: what's the difference?

At a glance they look similar: both are cloth-reinforced tapes on a big roll. In use they behave very differently.

Gaffers tape Duct tape
Finish Matte, non-reflective Usually glossy
Removal Designed to peel off cleanly without sticky residue Built for permanent hold; often leaves residue
Tearing Tears cleanly by hand Tears by hand, but edges can stretch and string
Best for Temporary jobs on floors, gear and finished surfaces Permanent fixes, heavy outdoor repairs, sealing
Price Higher per roll Lower per roll

The short version: use gaffers tape when the tape has to come off again and leave the surface as it was. Use duct tape when you want something stuck for good. If your job is a permanent repair, our duct tape by the case is the better buy.

Gaffer tape vs gaff tape vs gaffer's tape: are they different?

No. "Gaffers tape", "gaffer tape", "gaffer's tape" and "gaff tape" are all names for the same product. Which one people use is mostly habit, and many crews just say "gaff" for short.

How to store gaffers tape so it lasts

Gaffers tape has a shelf life. Ours averages about 12 months when stored properly, which means at 80°F or below and away from direct sunlight. Heat softens the rubber adhesive, so a case left in a hot truck or trailer all summer will not perform like a fresh one. If you buy by the case, store it somewhere cool and rotate stock.

Which gaffers tape should you buy?

  • One job or a kit refill: a 3 pack of gaffers tape.
  • A small crew or venue: a half case for case pricing in a smaller quantity.
  • Production companies, rental houses and venues: a full case, which gives you the lowest price per roll.

Most crews start with 2" black. Add white for labeling and a few colors if you color-code by department. You can browse every size and color on our gaffers tape page. Shipping is free on all adhesive products.

FAQ

Does gaffers tape leave residue?

Quality gaffers tape is made to remove cleanly. Ours uses a natural rubber adhesive that leaves no residue behind when removed. Heat, sunlight and leaving tape down for long periods all make clean removal harder, so take it up when the job is done.

Is gaffers tape waterproof?

Gaffers tape is cloth-based with a light PE coat, so it handles damp conditions better than paper tapes. For a permanent waterproof seal, duct tape is the better tool.

Can you write on gaffers tape?

Yes. White and light colors are the usual choice for labeling with a permanent marker.

Why is gaffers tape more expensive than duct tape?

You are paying for the clean removal, the matte finish and the cloth that tears straight by hand. On a set, stage or rented venue, those features save surfaces, cleanup time and damage deposits.

Read more

Gaffers tape

Stage Tape Guide: Gaffers, Spike, Glow, Hazard and Console Tape Explained

A guide to every stage tape: gaffers tape for cables, spike tape for marks, glow tape for blackouts, plus hazard stripe and console tape.

Read more
Gaffers tape

Where to Buy Gaffers Tape: Hardware Store vs Amazon vs Buying by the Case

Hardware store, Amazon or a tape supplier? What to check before you buy gaffers tape, and how much the price per roll drops by the case.

Read more