Stage Tape Guide: Gaffers, Spike, Glow, Hazard and Console Tape Explained
"Stage tape" isn't one product. It's a whole family of tapes that theatre, concert and event crews use to mark positions, secure cables, light the way backstage and label equipment. Searches for "stage tape" have grown sharply in Google Trends over the past year, so here is a clear guide to each type, what it's for and which one you need.
1. Gaffers tape: for securing cables and gear
Gaffers tape is the workhorse of any stage. It's a matte cloth tape with a rubber adhesive that holds cables, cable covers and gear in place and peels off without leaving residue on the deck.
- Use it for: taping down cable runs, securing masking and soft goods, quick fixes during changeovers
- Why matte matters: it won't reflect stage lights or show up from the house
- Our specs: 12 mil, 42 lb tensile, 60 yd rolls, 1" to 4" wide
Black is the standard on dark stage floors. Colored gaffers tape helps departments color-code their cables and gear.
2. Spike tape: for marking positions
Spike tape is a narrow tape used to "spike" (mark) exactly where set pieces, props and performers go, so every scene change lands in the same place. It's narrower than gaffers tape, so marks stay small and neat.
- Size: our spike tape is 1/2" x 60 yards, 24 rolls per case
- Colors: fluorescent yellow, orange, pink, green, blue and red
- Why fluorescent: bright colors stay easy to spot in low light during scene changes
- Tip: give each scene or set piece its own color, so the crew knows which mark belongs to which move
Our spike tape conforms to irregular surfaces and can stay down for weeks through a rehearsal and performance run.
3. Glow tape: for backstage safety in blackouts
Photoluminescent (glow in the dark) tape charges under stage or work lights and then glows during blackouts. Crews use it to mark step edges, offstage corners, set-piece edges and exit paths, so actors and crew can move safely in the dark between scenes. "Glow in the dark tape" also shows steady, year-round search interest in Google Trends. See our photoluminescent tape.
4. Hazard stripe tape: for edges, steps and trip hazards
Hazard stripe tape in black/yellow or red/white marks permanent hazards: stage edges, loading-dock lips, step noses, pit edges and backstage aisles. It's built to stand out. For heavy foot traffic, our hazard striped duct tape (11.8 mil, 70 mesh) is the tougher option, and our 6 mil vinyl warning tape is a lighter choice.
5. Console tape: for labeling boards
Sound and lighting operators run a strip of white console tape along a mixing or lighting console to label channels and faders. It's designed to write on and to come off the board cleanly. Ours comes in 1/2" and 1" x 60 yd rolls.
Quick reference: which stage tape do you need?
| Job | Tape |
|---|---|
| Taping down cables and gear | Gaffers tape |
| Marking set and performer positions | Spike tape |
| Safe movement in blackouts | Glow tape |
| Stage edges, steps and trip hazards | Hazard stripe tape |
| Labeling sound and lighting consoles | Console tape |
Building a stage tape kit
A practical starting kit for a school theatre, house of worship or touring crew:
- 2" black gaffers tape, in a half case or full case
- 2" white gaffers tape for labeling
- A case of spike tape, in as many colors as you have scenes or departments
- Glow tape for steps and offstage edges
- White console tape for the booth
Shipping is free on all adhesive products.
FAQ
What tape is used on stage floors?
Gaffers tape secures cables on stage floors, and spike tape marks positions. Both are designed to come up cleanly after the run.
What is the difference between spike tape and gaffers tape?
They're similar tapes for different jobs. Spike tape is narrow (ours is 1/2") and fluorescent, for marking positions. Gaffers tape is wider (1" to 4") and matte, for holding cables and gear.
Can you use painter's tape on stage?
Painter's tape works for short-term paper marks, but it tears more easily and isn't made for foot traffic or cable runs. Most crews use spike and gaffers tape for anything that has to survive a run of shows.